SMPS300RE +-36V (dual voltage) 110V Power Supply

SMPS300RE +-36V (dual voltage) 110V Power Supply
Views: 11098 Brand: PCBStuff (Connexelectronic)
Product Code: 10000082
Availability: In Stock
Qty: Add to Cart

Input: 110VAC
main output: +-36V DC (+-10%)
aux output +12VDC 
Dimensions: 100x100x36mm

Enhanced Version of the previous SMPS300R, with dual CLC filter on the output section and compact profile power transformer, suitable for low-noise and high-end Power Amplifiers, both Class AB and Class D/T. It uses Half Bridge resonant topology, capable of delivering 300W continuous and up to 400W peak power for audio applications. SMPS300RE has by defauly only diferential output voltage, for single output voltage, refer to SMPS300RS. The stock available output voltages are adjustable within approx. 10% and the ordered voltage value is at the middle of the interval. For example the 30V version can be adjusted from 28V to 32V. In this way, the available voltage versions covers almost all the voltage range from 22V to 80V or eve more when custom voltage is chosen. The main feature of this power supply is the absence of the heatsinks both for power switches and rectifier diodes, due to increased efficiency, up to 94.3% for higher voltage versions, due to the fact that the transistors are soft-switched, and the current through the switches has sinusoidal shape, and there are no additional losses in output inductors. Also, the amount of EMI is much less than any conventional power supply, and could be compared with a linear well regulated power supply. The size and weight is greatly reduced, allowing to install the SMPS300R to be installed into low profile case, with it's 100x100mm and 32 to 40mm tall depending on the voltage version and capacitors used. The SMPS300R features over-current protection which limit the output current at about 130% of the maximum peak power, about 400W. 

This power supply is suitable for both class AB and class D/T amplifiers, which have the PSRR greater or at least 57dB. 

Target applications for this power supply unit include the TA2022 based amplifiers, TDA8920 or TDA8950 based amplifiers and IRS2092 amplifiers for the +-27V or +-36V version as well as other vendors amplifiers such as Hypex UCD180 Amplifier modules, TK2050 amplifiers or TDA7293/4 amplifiers. 

We can not do any custom versions, as we have the smps ready made in stock.
There are no reviews for this product.

Write a review

Your Name:

We do not moderate any reviews except those postings that are clearly not reviews. Questions or comments that are not reviews might be deleted. If you have a question, please contact us. Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:

Input: 110VAC main output: +-36V DC (+-10%) aux output +12VDC  Dimensions: 100x100x36mm ..

200W 36V Power supply. This comes as pictureD without any power plug or cables. Input can be swit..

Input: 230VAC output: 38V DC (+-10%) Dimensions: 100x100x36mm   The connexelectronic sm..

Note: We get the meanwell products from our supplier, it takes 2-7 extra days of handling time if bo..

Our original and bestselling USB DAC with Sabre ES9023 DAC chip, Savitech SA9023 USB receiver. ..
$42.00 $29.99
41 reviews

The Hifimediy USB isolator is used to prevent ground loop noises and increase sound quality. It work..
23 reviews

This model is discountinued. Look at the 9018 model instead:
43 reviews

Best portable DAC in Norwegian newspaper VG! 6 stars and best portable DAC of the Year in Lyd og Bil..
38 reviews

US :