The T1 amp deploys the sta510a as output chip in full bridged, non-paralled configuration.This amp is best used with speakers around 8ohm. It can driver 4ohm speakers, but output will be less, around 50W.
This version has a CTR volume potmeter and uses SPIRIT MKP input caps instead of MCAP’s.
The board can only take DC powersupply, no AC. Accepted DC range is 24V – 39V. We recommend the Connexelectronic 38V (turned down a bit to around 35-36V) to power it
Speaker hookup:
Ground on the two channels can not be connected together. It is ok to only connect 1 speaker and leave the other channel unconnected if desired.
Specs:
– 2*100W@8ohm
– 2*50W@4ohm
– Power input: DC 24V-39V (only DC!)
– TC2000 controller and one sta510a power stage chip.
– On/off relay, preventing “pop” sound in speakers during on/off
– Input impedance: 50K
– Input sensitivity for full power: 1.5V rms
– Dimensions: 128x81x38mm
– PCB thickness 2mm
– Comes fully assembled
– All caps and parts are well known brands
– Big fanless heatsink.
Part brands might change slightly between batches because of availbility.
| Weight | 0.38000000 kg |
|---|
Be the first to review “Hifimediy T1 CTR vol pot TK2050 STA510”
Related products
Amplifiers
USD119.00
Out of stock
USD129.00
USD69.99
Amplifiers
USD59.99
Out of stock
USD109.00 – USD112.49
USD99.00
Sale!
Amplifiers
Original price was: USD114.00.USD99.00Current price is: USD99.00.
Amplifiers
USD45.00
Reviews
There are no reviews yet.