Hifimediy T3S
USD92.00
We don’t make this configuration anymore, we only have this amp with Jantzen caps now.
Out of stock
Notify me when this product is in stock
We don’t make this configuration anymore, we only have this amp with Jantzen caps now.
The T3S is the new stereo version of T3. It has two sta517b output stage chips and are good at driving 4 ohm loads. 8 ohms loads can also be handled, but the T4 amp will produce higher output for 8 ohm loads.
It is similar to the T2 amp except higher powered and that it doesn’t have a volume pot.
- 300W+300W output @4ohm, 150W+150w @8ohm
- Power requirement: dual ac 34 – 0 – 34 or single DC 48 – 0 (AC between 30 to 36V is ok, and DC between 36 and 48V)
- Input impedance 20K
- Input sensitivity for full power 1.5V
- Gain: 25x
- Inputs: 2.54mm connectors for signal, 7.62mm connector for power supply
- Outputs: 7.62mm connectors
- Speaker protection: DC/error and power on delay, power down immediately off (when transformer powered)
- Power down interface to switch or controller: It can be remotely switched off from compatible preamp or controller. Shorting the 2 pads of the power down interface will power down the amp.
- Dimensions: 125x180x40mm
| Weight | 0.80000000 kg |
|---|
Be the first to review “Hifimediy T3S”
Related products
Out of stock
USD129.00
USD99.00
Sale!
Amplifiers
USD5.00 – USD89.00
USD99.00
USD49.00
Out of stock
USD109.00 – USD112.49
Amplifiers
USD119.00
Out of stock
Amplifiers
USD66.00
Reviews
There are no reviews yet.